Need tech support? Email us at torquesupport@MesaLabs.com or submit a ticket using the form below. Tech Support office hours are from 7:00am through 4:00pm, MST.
Application Notes
Torqo II 1600 Preventative Maintenance
Recommended maintenance and cleaning procedures for Torqo Model 1590 and 1600
Torqo Drive Motor Loose Set Screw
Correction procedure to fix loss of drive failures associated with loose set screws
Bridge Throwaway Distance User Instructions
There is a defined parameter named “Bridge Throwaway Distance” that was put in the Torqo code to separate the removal peak detection from the bridge peak detection.
Enabling Auto Transmit to PC
Enabling auto transmit to PC and updating Torqo settings for Outputting Test Result Data is important. This can be used to complete that process.
Torqo Configure Sample Replace and Delete Options
Torqo Model 1600 Firmware with version 5.09 and later allows administrators to configure several data sample edit and deletion options.
Configure Model 1600 for Model 1502 PC Output
In order to configure the Torqo model 1600 units for compatibility with the Model 1502 PC output these steps are required.
Torqo Data Connectivity User Manual
The Mesa Labs Torqo Model 1600 has several connectivity options to allow data to be sent to a remote computer or network folder. This manual shows all the features.
Guide to Troubleshoot Most Common Erors Associated with SureTorque Testers
SureTorque Analyzer Troubleshooting
Downloading New Firmware to PLC
Adding a Generic Printer to the Torqo Model 1600
Recommended Power off Procedure for Torqo II+ Model 1600
Updating Torqo Firmware Model 1600
Torqo 1590 SD Card Replacement Instructions
Torqo Aeon Battery Replacement Procedure